Autoclave IGEA la petite

 IGEA la petite art.2300

 

Autoclaves IGEA la petite assure maximum safety to patients, doctors and operators, since they reaches and maintain sterilization parameters indicated by the European working group charged with the drawing up of regulations for small steam sterilizers (CEN TC 102 wg5).

Such parameters are assured by control tests performed according to C.B.M. quality system, certificate ISO 9002, through a microprocessor board, with components that are totally electronic, and through a thermoresistance, effecting a monitoring on the parameters of the cycle which is revised at the tenth of a second.

Moreover, autoclaves with a maximum temperatures oscillation, during the sterilization phase, oqual to 6 tenths of °C (-0 +0,6 °C) assure the total integrity of instruments and sterilized materials, that could be endangered by higher temperature oscillations.

Printer, Personal Computer, Teleservice

Autoclaves are equipped with an integrated serial port that, in addition to the connection with the printer or with a normal PC, for a complete certification of the sterilization cycle, allow as well, always through the connection with the PC, a teleservice: that is a distance check system of cycle parameters and components with the possibility of an intervention on the software.

Consumptions, Maintenance

Auto-diagnosis and automatic monitoring in addition to assure safety, also allow a reduction of electric consumptions and a simplified programmed maintenance.

Technical particulars

The machines are manufactured according to the present quality and regulations standards and prearranged for any future revision that will be indicated by European Equalized Regulations.

 

 

IGEA la petite due its sizes and its frontal system for water loading and steam release is particularly fit for embedding assuring absolute lack of steam or condensate dispersion inside the fumiture, without any inconvenience for the operator.

 

 

Heating times
Cold machine (ambient temperature)	16 min.
Warmed-up machine	8 min.

 

Sterilization times calculated with safety coefficient
Unpacked instruments	134 °C	5 min.
Packed instruments / Glass	134 °C	20 min.
Waste in stainless container	134 °C	30 min.
Porous material / rubber not packed	121 °C	20 min.
Porous material / packed rubber	121 °C	30 min.
Rapid cycle for unpacked instruments	134 °C	3 min.

 

Drying
Available drying times	0 - 10 - 15 - 20 - 25 - 30 min.

 

Safety equipment
Safety	Overpressure safety valve Overheating cutoff Decompression valve in case of breakdown or black-out Mechanical closing of the door with pressure locking device

 

 

Technical particulars
Check	Completely with microprocessor
Materials	Stainless steel AISI 304 - 18/10
Maximum absorbed power	1614 W
Electric consumption of the standard cycle	0,27 KWh
Feeding voltage	220 V. - 50 Hz.
Feeding current	7,3 A
Number og cycles	5+1 rapid
Sterilizing temperature	121°C - 134°C
Reading precision	0,1°C
Sterilizing temperature oscillation	0,6°C (-0 / +0,6°C)
Drying	Yes
Instrumentation	Digital
Tank	3,2 lt.
Electronic water control	mass-producted
Display	Backlighted with liquid crystals 16x16 characters
Messages language selection	Italiano - English - Francais - Deutsch
Dater	mass-producted
Maintenance warnings	mass-producted
Intelligent autodiagnostic	mass-producted
Serial port	mass-producted
Printer arrangement	mass-producted
Teleservice arrangement	mass-producted
Cycle-counter	mass-producted
Printer	Optional
Program for teleservice	Optional
Chamber capacity	11 lt.
Chamber size	200x165x320 mm.
External sizes	430x425x325 mm.
Packing	530x530x430 mm.
Net weight	30 Kg.
Gross weight	41,6 Kg.